Tiller check Elm Møllegabet bow
I have started the tiller process on my first adult sized Elm self bow and would appreciate a sanity check, especially considering checks/cracks weakening the right limb.
My own take is the following: - Right: Hinge in the inner limb - Right: Too stiff in the outer part before the stiff lever - Left: Not too bad but stronger than the right side so needs material removal
Design aim: - 69” 40#@29” - stiff levers approx 1/3 of the limb - 4cm width at fade narrowing slightly until the narrow lever - Slightly heat treated using hot air. - Functional shooter rather than good looking (I am completely hooked on bow making so pretty details will be reserved for future bows :) ) - Lower pull weight would be acceptable if necessary
I think the video is more showing of the tiller (pulled at approx 40#) but that means I cannot post images of the front and back so will try in a comment instead.
Thank you!