API Service not showing up in HA
Hi, I am following the geoffdavis project [https://github.com/geoffdavis/esphome-mitsubishiheatpump](https://github.com/geoffdavis/esphome-mitsubishiheatpump)
I am working to add a remote temperature reading to the heatpump as described in this section of the readme [https://github.com/geoffdavis/esphome-mitsubishiheatpump#remote-temperature](https://github.com/geoffdavis/esphome-mitsubishiheatpump#remote-temperature)
In my heaptpump config in esphome is the following code snippet:
>`substitutions:` `name: hptest` `friendly_name: Test Heatpump` > >`climate:` `- platform: mitsubishi_heatpumpname: "${friendly_name}"id: hp# ESP32 only - change UART0 to UART1 or UART2 and remove the# logging:baud_rate above to allow the built-in UART0 to function for# logging.hardware_uart: UART0# Enable Home Assistant APIapi:` `encryption:key: "REDACTED"` `services:- service: set_remote_temperaturevariables:temperature: floatthen:- lambda: 'id(hp).set_remote_temperature(temperature);'- service: use_internal_temperaturethen:- lambda: 'id(hp).set_remote_temperature(0);'`
​
From reading the [esphome docs](https://esphome.io/components/api#user-defined-services) I expect the service esphome.mitsubishi\_heatpump\_set\_remote\_temperature to show up in HA. After programming the node, there are no esphome services.
[W54SyUi.png (706×455) (imgur.com)](https://i.imgur.com/W54SyUi.png)
I am not sure what logs to include to help diagnose what might be happening, although I expect it to be a simple error on my part. Any thoughts?