Thermal runaway?
TL;DR: my Q5's nozzle temperature is spiraling out of control, as soon as I tell the hot end to heat up (even to 10°c) the hot end will rapidly raise the temperature until I unplug it or shut down the printer. The hottest I've seen it show is 380°c before I was able to reach the power switch.
- I've replaced the heat cartridge, - I've replaced the thermistor (definitely not the issue here), - I've tried both the spare flsun heat cartridge & some aftermarket ones from amazon, - there's no sign of scorching on the control board.
I had a print fail (clogged nozzle that encased the entire hot end in a glob of plastic), to remove this I heated the hot end to 80°, the blob fell away without any real issues. As this was happening I saw what I believe to be arcing between the wires of the heat cartridge, I shut it down to prevent damage but it seems I was too late.
I don't know enough to be confident, but it seems to me that if the heat cartridge controller will heat on command, but won't stop that I may have a damaged control board.
Anyone else had issues like this? Help, please. ;_;