My first model I created (with fusion) and printed. A coat hanger for my desk wall. You can see the faults so I welcome feedback

GST30 PLA+ Print Temp: 180°C - 230 C Heated Bed: 40 C - 60 C

I got these two printers and the filament from a friend and have been calibrating with AI but need more help with fine tuning this. I am going to print another as I’d like to just hang my backpack but don’t want it to snap but since the filament was free I’m okay tinkering until it’s dialed in

These are some settings and I’ll post more detailed

Layer Height: 0.20 mm Wall Line Count: 3 Infill Density: 35–40% Nozzle Temp (PLA): 205°C Bed Temp: 60°C Fan Speed: 100% Print Speed: 50 mm/s Build Plate Adhesion: Brim Support Structure: Tree Support Density: 12% Support Overhang Angle: 50° Support Z Distance: 0.20 mm