RedditPP Mascot

RedditPP

r/GalaxyFold • … • u/mizuya

🧲 Fold7 charging coil & MagSafe metal ring position!

* This is the follow-up post to the [🎯 MagSafe metal ring/charging coil position on the Fold6!](https://www.reddit.com/r/GalaxyFold/comments/1eh1rzb/magsafe_metal_ringcharging_coil_position_on_the/) post. * In previous posts I took actual X-rays from the respective Folds, but for now we just this screenshots of the teardown of the actual device from this YouTube video: [What Does This Mean? Z Fold 7 Teardown...](https://www.youtube.com/watch?v=47oNXKNcNAg) * We actually use the official data from Samsung, so it should be without any errors. In [this document provided by ](https://developer.samsung.com/mobile/accessories.html)Samsung, you see [this image of the Fold7](https://i.imgur.com/SCaaGv1.png) with all information we need. * The image size of the device in pixel is the same as the real size in millimeters; 1mm = 10pixel. The Fold7 dimensions are: 158,4mm x 72,8mm. So the image is 1584 pixel x 728 pixel. * I located the wireless charging coil and placed a circle around it. The absolute middle point of it should be around this. From there I added some guidelines: symmetrical horizontally and vertically (yellow), lines cross the center of the wireless charging coil horizontally and vertically (red) etc. * Most common MagSafe metal rings have a 45mm inner diameter and a 55mm outer diameter. I added both rings with circles. The ring area is colored black. * The charging coil and also the MagSafe metal ring location is horizontally near the center. The metal ring is 7,93mm (\~8mm) away from right side and 9,87mm (\~10mm) away from the left side of the overall device. * Vertically, the charging coil position about 7mm below the middle of the backplate of the phone. So it's 85,92mm (\~86mm) away from the top and 72,48mm (\~72,5mm) from the bottom. The metal ring is 58,42mm (\~58,5mm) away from the top and 44,98mm (\~45mm) from the bottom of the device. * The distance between the camera bump and the top of the metal ring is zero (\~0mm), so it's perfectly on the same height. This will help you a lot to place it. * I think you have all information you need to place the metal ring correctly. If there's something missing, tell me, then I can change/add it. Also, please report, if it works perfectly fine for you or if you have issues.

[Fold7 MagSafe metal ring and charging coil position and guiding lines with measurements](https://preview.redd.it/rr959q7alsff1.png?width=728&format=png&auto=webp&s=e7e16ab97952a25f7d757e18309d2896c84e2fbb)

**PS:** The overall post, all measurements etc. are a rough approximation based on a screenshot and render images. I'll double-check the stuff, once we have real X-ray images to compare.

**PPS:** Thank you [Phone Repair Guru](https://www.youtube.com/@PhoneRepairGuru) with your amazing video; [What Does This Mean? Z Fold 7 Teardown](https://www.youtube.com/watch?v=47oNXKNcNAg)… Thank you u/andy2na for [your post](https://www.reddit.com/r/GalaxyFold/comments/1m9f3ew/charging_coil_location_on_the_fold7/), too.

**PPPS:** Thank you u/Cyb3rJ0hn for mentioning the official data from Samsung ([here](https://www.reddit.com/r/GalaxyFold/comments/1mbl36j/fold7_charging_coil_magsafe_metal_ring_position/n5odre0/))! This helped a lot! ❤️

— 0