RedditPP Mascot

RedditPP

r/GalaxyFold • … • u/mizuya

🧲 Fold8 MagSafe/Qi2 metal ring position (provisionally based on MagSafe case)

# [✋EDIT:] [Please check the new post & guide based on official Samsung documents!](https://www.reddit.com/r/GalaxyFold/comments/1vl2pbx/fold8_fold8_ultra_magsafeqi2_metal_ring_position/)

* **Silver lining: everything works perfectly fine with the placement of the shown pictures!** * I ordered 2 other cases to check/verify, but each MagSafe spot is slightly shifted. It's roughly the same area (obviously), but not the exact same spot. * I'm not sure if they didn't receive official documents themselves or they just don't care, like "as long as it works" mentality 😂 * The horizontal placement seems to be identical in all cases. * The vertical placement is slightly shifted, between 11 and 13mm. The "Spigen Air Skin MagFit" says has 13mm distance between the ring and the bottom edge of the Fold8's back glass. I would assume Spigen's placement is more reliable than cheap cases of noname manufacturers.

# ℹ️ No official documents or x-rays available

* Since the Fold8 hasn't been released yet, Samsung hasn't released its reference documents for component placement, and nobody has dismantled or X-rayed it so far, I had to approximate the position based on a (cheap) MagSafe case. * I attached a MagSafe metal ring to my Fold8, and it works flawlessly with wireless charging and my MagSafe accessories 😌 * In my other fun/meme post, you can see the guiding tool and the result. I'll make a dedicated post for MagSafe grips and stands soon™

# 📏 Mockup with guiding lines

* I created a mockup in Photoshop afterwards to share the exact placement. I removed the volume buttons and added guiding lines (in Photoshop), which make it very obvious that the ring position is absolutely not symmetrical! It is significantly offset from both the center point and the horizontal axis. * That's why most accessories, like controllers, won't work well. Please keep in mind that these measurements apply only to the back glass of the phone. They are measured from the edge of the metal ring to the edge of the back glass!

# 🔁 Work in progress

* Please note that this is a **preliminary post.** Once exact measurements become available, especially through official Samsung documents, I will update them here in this post. * Also, since I don't have a Fold8 Ultra (yet 👀), I unfortunately can't provide any measurements or details for that specific model...

— 0