The 2nd coming (now with added rain over)
Mk2 arrived late yesterday, with some differences between it and my original.
1) The battery on this one is the quoted 725Wh, not the 800Wh the original came with. Unfortunate but that’s the Spec. on the site.
2) Front hub is now Magura center lock disk while rear is 6-bolt. I think this is the same as the old one just that the actual centre lock is branded now.
3) Bell configuration has changed to an offset one. This is an improvement as it was difficult to reach past the Enviolo shift display before.
4) Not a big one but possibly related to the battery being different; it was installed on the steer tube mount, not next to the motor as before. I’ve moved it around as I preferred that.
5) Crank arms are now FSA branded. They look the same as before but I don’t remember them having the paint on.
The rain cover arrived before the bike did. It comes in a handy zip case inside a sturdy box. I’ll keep both for storage over the summer. The downside is there are no instructions on how to install the tent poles in the box or on the product page. I did manage to find an installation video here: https://youtu.be/9he4ECBjnfA?feature=shared Pay attention around 42 seconds in as you are supposed to thread the tentpoles through a middle reinforced sleeve.
Initially I’m going to use blue Park Tool thread lock on the bolt for the steering barbs. I have red Loctite if it calls for something stronger, and am digging through my tools for a very small drill bit to potentially go through the bolt and fit a splitpin as a failsafe.
Battery is on charge now, will see what pedalling I can get done through the week.
Taking recommendations on rain trousers if anyone has them!