RedditPP Mascot

RedditPP

r/diyelectronics • … • u/fuzzy_mic

Connecting the output of power supplies.

The Problem: I have a power supply from 1995 (Allen & Heath RPS-9) that plugs into the wall and leads to a 5 pin connector. It converts AC into DC. The unit has a label.

Pin 1 = -15V @ 2.5A

Pin 2 = 0

Pin 3 = Earth

Pin 4 = +15V @ 2.5A

Pin 5 = +48V @ 0.1A

And, it doesn't work. It's not made any more.

My DIY solution is to buy 3 power supplies, two 15V power supplies plus one 48V. And wire them together like this.

![img](a7pnmpyjgw2h1)

I suspect that this is a bad idea, but don't know why it would be. Why is this a bad idea?

Thank you in advance.

(DM me if you know where I can get a working RPS-9)

— 0