Heat Creep problem solved!
Base-model Ender 3 mysteriously started having heat creep clogging, especially with PETG. After 30 minutes or so, extruder started clicking, nozzle clogged, print failed. EVERY TIME. I played around with retraction settings, changed temps, new filament, new Bowden tube, different brand filament, etc. Still happened on any print longer than about 30 minutes.
Finally found the problem: When I had changed the nozzle, I accidently moved the big red heater block wires in front of the fan. This blocked a lot of airflow between the fan and the heat break cooling fins. Finally, figured that out and moved them back to the side of the heat break where they belong and bingo! Haven't had heat creep since.
tl;dr OPERATOR ERROR Heater block wires obstructing cooling fan. If you're having heat creep issues, check the position of those wires.