Am I being impatient with osmo polyx oil?
I had a damaged worktop in the kitchen so sanded back old finish and have applied 3 coats of polyx. I used white scotchbrite pads doing very thin coatings really working it in to the surface and left at least 8-10 hours between coats. It has been left alone for 48 hours but today I put a cup down on the surface and a little while later noticed that it has left a ring. I also got a small amount of water (a few droplets from something I took out the fridge) on the surface which I removed a couple of minutes later and it has risen the grain slightly. I know it does say it can be a few weeks before it's cured so am I being too impatient thinking that this shouldn't have happened already?