RedditPP Mascot

RedditPP

r/heatpumps • … • u/licoriceallsort

Advice: Acoustic barrier/box for hot water heat pump

Hi there

My Neopower All-in-one hot water pump is super noisy, and unfortunately the system has been set up with the fan directly pointed at my bedroom window, which also reflects the sound to my neighbour. I can hear it on the other side of my house, and from the footpath a good 15m away. (Obviously not as loud as in the bedroom, where I've measured it at 79dB (around 10:30pm at night, so intense), and it runs around 59dB, 17dB higher than advertised in their specs sheet (42dB), and now only 6dB higher than the website advises. I've reached out and been ignored both by the company that installed (fobbed me off to Neopower, who only reached out with an email they forwarded that laughed at my set up).

I am planning on installing a double glazed window to help insulate the noise but that matter to nothing if I open the window.

I'm thinking of an acoustic box, but I'm wary of the heat the system will put out and that a box will stifle that. Anyone had any experience with this and have success?

I'm almost at the point of throwing out the 2.5yr old system and buying one with a separate fan/compressor box like a reverse cycle (which it's supposed to run at the sound level of).

TIA team!

\- The size of their house in square feet or square metres =85sqm

\- Wall thickness = weatherboard house with insulation

\- Pane of windows = single pane/double pane (some are one, some are another)

\- Location/climate = cool temperate, Victoria Australia

\- Include the model numbers and size of the heat pump as best you can = NEOPOWER HEAT PUMP MODEL NA32-260A

— 0