SHR1 - Going from 4 disks to 2
I currently have 2x 4 TB and 2x 6 TB Reds in my DS918+. The 6 TB disks have been in service since the DS918+ was released in 2017 and the 4 TB disks were used in an older 2-bay unit even before that... so they are really old. Even though no issues have been found via SMART checks, the disks themselves are making some chirping/screeching noises so I am planning to replace.
I have 2 new 8 TB Reds. I wanted to go down from 4 disks to 2 in the NAS. At the time I purchased them, I didn't do my due diligence and found out you can't really shrink a storage pool or volume in SHR. I don't want to go up in storage space since my needs aren't as much as they used to be in 2017, which is why I wanted to go down to 2x 8 TB disks.
So now my plan is to pop one drive out, put one of the new 8 TB disks, create a new pool and volume. Move shared folders over to the new volume. Take out another disk and put in the 2nd 8 TB disk and that would give me 1-drive fault tolerance when I add it to the new storage pool. Then blow out the original storage pool and volume and remove the remaining 2 old disks.
Will this work? One 8 TB disk is enough to hold the data on the new volume while there's only one disk. Yes, I have a good backup. It's just a backup though, I do not want to start from the ground up and restore from this backup.