Migration question re moving from DS1812+ with DX512 to DS2419+
Hey,
I have a DS1812+ with the expansion chassis with 13 disks in total broken down into an 8 disk volume on the 1812+ (volume 1) and a 5 disk volume on the Expansion chassis (volume 2).
I want to move volume 1, as is, with all apps intact to the 2419+, which I believe is possible just by moving the drives. Please correct me if I am wrong.
My problem is volume2. I have been reading that disks in the expansion chassis have no system partition, so I can't just move the 5 disks into the 1812+ main chassis as it will not boot. Again, correct me if I am wrong. I can't move them to the 2419+ because there will not be enough room. Basically, this volume will be inaccessible on the 1812+ unless I create a new volume 1 using new disks, right? I can then add 4 larger disks to the 2419+ to support the 5 disk volume 2 and move the data across.
Does this make sense, or is there a better way to move between the two solutions given my setup?
For information purposes I have 8 X 10TB WD Red in an SHR-1 setup in the 1812+ and a 5 X 8TB WD Red in SHR-1 in the expansion chassis.
Lastly, I have been continually upgrading/expanding each of these RAID groups over time creating many partitions on the disks. Is there any negative to this, or should I try to offload the data and recreate the volumes from scratch?
Thanks in advance for any help any of you may be able to provide.