RedditPP Mascot

RedditPP

r/synthesizers • … • u/pimpbot666

Show me your 'injury list' gear!!

My current list:

Kurzweil K2000s keyboard:

Won't boot. I just picked this up non-op for $50, and it won't boot, but the diagnostics screen works, and it passes all the test. I've been going down the rabbit hole on this thing for a couple days with no luck.

Roland XP50:

Bought Non-op for $50. I bought it thinking I could re-cap it and flip it for a modest profit. Bad capacitors left me with a blank screen with backlighting, and no audio. I gave it a full re-cap, and still nothing but a blank screen. I may have disturbed a SM resistor or two and messed it up. I gave up. I already bought another XP50 non-op and it was an easy fix after a re-cap.

Midiman Keystation 49e:

Bad slider throws the MIDI volume all over the place at random. I also dropped it on it's USB port with a cable present. It broke the USB port off the mobo inside. I just soldered a hacked off cable to the mobo. That part works, but it still throws random volume changes out.

CZ-101:

Dropped on it's jack side, broke the jack off the audio board inside. I hacked in a 1/4" guitar style jack. Works, but it's noise AF. It probably has other issues making it noisy. It might need a re-cap.

Boss BR600:

Backlight capacitor is intermittently failing. I get a blank screen that comes back on after I leave it on for 15 minutes to warm up.

Yamaha REV500:

Previous owner dropped on it's front, broke the input trim pot shaft internally. I opened it up and hot-wired the audio past the input level trim. Now, it's always on full volume. I have to trim it from the effects send at my mixer. Still sounds pretty good.

TC Electronic M-One XL:

One bad memory chip makes it sound like a bunch of forks in a blender when I use any preset with a digital delay. Other presets work fine. This was bought non-op, thinking it was just a power supply issue.

TC Electronic M-One (non-XL):

Won't boot. Power supply issues are a common cause, but that's not it. I reworked the entire PS section and gave it a full re-cap, and it still won't do anything but display alien characters on the screen and won't pass audio.

Teac 1500 Reel to Reel:

I bought it for cheap with the intention of refurbishing it, and doing some tape saturation effects, or Brian Eno style Reel to Reel loops, but it needs a full refurb.... belts, capacitors, etc. It still collects dust on my shelf.

Share your injury list!

— 0