2015 Turbo failure, AGAIN
Just lost a second turbo on my deleted 15 GSW SEL. First turbo lost the compressor wheel (pictured) at 115k and spit metal all the way to the intercooler. I dropped the oil pan and found no metal in it, buttoned it back up and installed a turbo from ID Parts and while I was tightening one of the two bolts for the oil return line, it cracked the turbo center section. In an effort to save some money, I took the turbo to a local turbo shop, who then supplied and installed a new cartridge into my housings.
This weekend, I reinstalled the turbo, test ran, test drove, and was really happy to have my favorite car back on the road… then after about 100 miles, power suddenly dropped, oil smoke appeared and I shut her down and trailered it back to the shop. Post mortem revealed a broken shaft and oil pan full of brass. No doubt it’s all throughout the engine.
Now I’m seriously contemplating giving up on the TDI. I tried to do everything right, used turbo prelube, always used good oils and filters, etc. I’m not interested in paying 9k for a new long block, don’t love the idea of a used engine, shudder at the thought of pulling down my current engine to clean it out and replace bearings. I’m also wondering if the tiny turbo shaft size and bushing style bearings are ever going to be reliable in a tuned/ deleted car. They certainly seem to be failing at a high rate from what I have read. Is it time for me to move on from this money pit?