Cheap ASIO 2.0 /2.1 trick from amateur DJs
Hi All,
I am just starting with track impulse and as someone who is very sensitive to latency this is something I am so glad we can do. I am ditching simhub all together and applying the trick bellow to drive 2 earthquake shakers.
Now to give back to this awesome new community that we are starting here I wanted to share with you a DJ hack for ASIO on the cheap :)
You can get a FiiO or Jade Audio JA11-TC or JA11 (Its the same interface TC is type C the other is type A) and you get 2 channels with native ASIO driver you can plug into your amp.
Those are already cheap and you can use multiple if you need 4 corners or more ( I didn't try that as I only use 2 shakers but theoretically it should work)
FiiO JA11 would have ASIO out of the box but you can also get any mini dac with the same chip and flash the FiiO firmware onto it.
**List of devices compatible with the firmware:**
FiiO / JadeAudio JA11 : Native, no need to change the firmware.
JCally JM12 : you can get it very cheap from a chinese marketplace
Kiwi Ears AD1: Also very cheap and widely available
Audiocular A16x : Asia only but also accepts the firmware.
Generic / OEM KT02H20 Dongles: Any device that lists the chip as KT02H20 would work as long as you flash it.
>!**Devices to Avoid (Not Compatible)**!<
• CX31993 Dongles: Popular ultra-budget dongles like the JCally JM6 Pro or Abigail use the Conexant CX31993 chip, which uses an entirely different architecture and flasher.
• CS43131 Dongles: Devices like the JCally JM20 or Moondrop Dawn Pro use Cirrus Logic chips and cannot take KT02H20/JA11 firmware.
• KT0211L / KT0231H Cables: Some integrated DSP cables (like certain cheap KZ DSP cables or JCally PJ3) use different KTMicro sub-variants and may brick if flashed with the JA11 image.
Once flashed you just have to download the FiiO ASIO driver from their website.
**Tips:** When running the KT02H20 chip on the FiiO ASIO driver, you can drop the buffer size down to 64 samples for ultra-low latency.
**Pro-Tip:**
Connect the flashed dongle to an Android phone once using the FiiO Control App before putting it in your sim rig.
Set up a custom PEQ profile that cuts off everything above 90Hz. Because the EQ settings are saved directly to the KT02H20 hardware chip, it will filter out high-pitched signals at the hardware level.