RedditPP Mascot

RedditPP

r/trafficsignals • … • u/blackhawk1430

Econolite Cobalt controller starts up into "bench test" only?

Hi, I just got a second hand Cobalt (COB21100110000) for hobby use, but unlike all the video's I've seen of people using their own Cobalt controllers, mine shows the Econolite splash screen, the IP address assignments, and then finally enters "bench test" mode, which it fails and stays there forever. The buttons do nothing at any point. I only have circular connector A plugged in, but I've seen other people do that for desktop training/testing and it works for them. I also ensured to select an I/O mode by wiring up I/O mode bits A, B and C to the appropriate logic level, either +24V or 0V. All three modes do not change anything.

Then, I decided to connect up my computer to the console and look around the Linux OS. I read all the Bash scripts I found in order under `/etc/init.d/`. From my understanding, it tries to start what I assume is the main control application `/opt/econolite/app1/asc3app` early on, but **only** if that file exists, but perplexingly, **it does not exist**, so it continues on down the other init scripts until the very last one, which is the bench test mode script.

I don't understand how or why the main control application would have vanished from the filesystem, especially considering it appears to be read-only by default. More concerning however is that I don't have any way of getting that program since Econolite doesn't publish firmware publicly as far as I can tell. It would be a pity to have what appears to be a controller with good hardware (RAM and FLASH tests pass), but one missing file makes it totally useless.

I'm not sure where to find a definitive firmware "version" to report here either since I can't get into the normal application, although I did see what I think is a Git commit hash in the console output on startup: `git-sha 3b6350533071922c14a42837316c766182d269da`

Any advice would be much appreciated.

![img](b0z1siz7tn9f1)

— 0