6T40 Gen 2 Update
I posted here a couple of weeks ago regarding my 13 Cruze 1.4 and how I sometimes had no reverse temporarily until it "caught", and revving then slamming into other gears. I took the transmission apart, replaced the clutch plates for the 3-5-R and added the Sonnax drum saver. I installed a refurbished torque converter, installed the Sonnax zip kit for the valve body, replaced the pump seals and replaced the filter. While I had everything out I cleaned out the case to the best of my ability before putting everything back together. I tried to air test the drum (using a video on YouTube for reference) and was getting good results but it was difficult since I didn't have the correct fittings for my air nozzle. I then took it for a test drive and my heart sank when I had similar issues which only became worse after I ran the trans adapt quick relearn. Here's the video... your professional insight is appreciated. I'm not scared to take it down and try again as my goal is to learn.