RedditPP Mascot

RedditPP

r/traveller • … • u/TheinimitaableG

On stateroom sizes in Traveller

When trying to draw deck plans, it always seems like the staterooms are too small, and you end up with little tonnage left over for things like common areas. Why is that? does Traveller actually not allocate enough space? of is it something else?

I personally feel that the Traveller ships are in some ways inspired by the age of coal fired steam ships, but it is hard to get good interior data about those vessels. While deck plans are often available, it is hard to get the data about scale, and square footage. However there is a crap ton of readily available information about modern cruise ships, and they are in many ways similar to liners of the past era. Large passenger carrying ships out for a week or more at a time.

The typical 2 person cabin will have a bed, a couple of end tables, a sofa, a desk/make up table, and a storage closet or armoire, along with a private bathroom that includes a shower, sink and toilet. (aka the Traveller "fresher")

After review of of cruise ship cabin data for "normal" cabins I found that the typical double occupancy cabin ranges from 15 to 19 sq m. A small number of ships offer cabins that range from 9.2 to 13 a Traveller DTon is 4.5 sq m. at 4 tons per passenger we would get 36 sq m, or 72 sq m for a double occupancy cabin. The cabin is only about half or less of that space. The rest is galley, common and entertainments spaces.

The problem seems to come sn with drawing it on a grid. We naturally want to draw the walls aligning with the grid, and as a result the rooms seem to need to be larger than those on real world ships.

— 0