RedditPP Mascot

RedditPP

r/treadmills • … • u/trill_armadillo

ProForm 305 CST (6 years old) starts normally, then belt stutters and stops while display stays on

I have a 6-year-old ProForm 305 CST treadmill purchased from Academy. I've done zero maintenance on it since purchasing in 2020. Recently it started stopping during workouts.

Symptoms:

\- The console/display stays on when the belt stops. It's the belt itself that stops moving.

\- Before stopping completely, the belt sometimes stutters or briefly slows down, then resumes.

\- Changing the incline to 0 seems to make the problem more noticeable.

\- Initially, it stopped after about 2 minutes at 2 mph and incline 2.

\- After I adjusted the rear roller bolts (1/2 counter-clockwise turn using an allen wrench), it started stopping in under a minute at 2 mph and 0 incline, and then again at 1 mph.

\- The display remains powered throughout.

What I've tried:

\- Initially, the treadmill was plugged into a power strip shared with a 24-inch box fan.

\- I tried plugging it directly into the wall using an extension cord, but the problem persisted.

\- With the treadmill unplugged, the walking belt is extremely difficult to move by hand. I have to use considerable force to move it a few inches.

\- I initially thought the belt was too tight because I could lift it only about an inch from the deck. I turned the rear adjustment bolts counterclockwise by about ½ turn, but this didn't fix the problem and it actually seemed to stop sooner afterward.

I haven't added lubricant or replaced any parts.

My questions:

1. Does this sound more like excessive belt/deck friction, a failing motor, a motor controller issue, or something else?

2. Is there a safe way to diagnose the cause before paying for a service call?

3. Given that the treadmill is six years old, is it worth repairing, or would replacement make more sense?

Additional info:

\- The treadmill is kept and used year round in a warehouse that is not climate controlled. Wearhouse temperatures can range from 100°F in peak summer to the 50s during the brief winter.

\- This is in metro Houston where there's lots of humidity for 5+ months out of the year.

\- The warehouse also does get a decent amount of dust, as it's primarily used for a business, as opposed to the treadmill being located in a private home garage, etc.

— 0