RedditPP Mascot

RedditPP

r/truenas • … • u/Lamagedon

Storage pool status "Everything is ok" SMART data says pre-fail

Hi guys I have a pool running with 3 iron wolf 6 TB drives they work in this pool since they were new. Pool has been online for a year. I have set the drives to

`HDD standby 20 min`

`Level 1 - Minimum power usage witch Standby (spindown)`

I am wondering if I have configured something incorrectly. I would like to get as much lifetime out of those drives as possible and know if they are failing.

If they are failing I will get 2 8 TB IronWolf drives to create a back up Array to back up this to. It is not critical data. I can recreate it but it would be a hassle.

In storage tab pool is reported as “everything is fine”.

When I ran `smartctl –scan` to SMART check while logged through SSH.

Also I am getting temperature reading on my SSDs but not my HDDs. How can I read temperature from HDDs too?

Drive 1

`SMART Attributes Data Structure revision number: 10`

`Vendor Specific SMART Attributes with Thresholds:`

`ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE`

`1 Raw_Read_Error_Rate 0x000f 082 064 006 Pre-fail Always - 153662728`

`3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0`

`4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 163`

`5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0`

`7 Seek_Error_Rate 0x000f 071 060 045 Pre-fail Always - 11860149`

`9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9543`

`10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0`

`12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 18`

`183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0`

`184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0`

`187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0`

`188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0`

`189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0`

`190 Airflow_Temperature_Cel 0x0022 063 053 040 Old_age Always - 37 (Min/Max 23/41)`

`191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0`

`192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 297`

`193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 809`

`194 Temperature_Celsius 0x0022 037 047 000 Old_age Always - 37 (0 23 0 0 0)`

`195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 153662728`

`197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0`

`198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0`

`199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0`

`240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7563h+37m+43.023s`

`241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3170084434`

`242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 26343533077`

​

`SMART Error Log Version: 1`

`No Errors Logged`

​

`SMART Self-test log structure revision number 1`

`Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error`

`# 1 Short offline Completed without error 00% 9543 -`

`# 2 Short offline Completed without error 00% 9391 -`

`# 3 Short offline Completed without error 00% 9223 -`

`# 4 Short offline Completed without error 00% 9055 -`

`# 5 Short offline Completed without error 00% 8887 -`

`# 6 Short offline Completed without error 00% 8719 -`

`# 7 Short offline Completed without error 00% 8551 -`

— 0