Four Blackstone Oil Reports + Break-In Oil/Filter Trend — 2026 Sequoia i-FORCE MAX
Hi Team! I know this is a Tundra Group but I wanted to share some information regarding my wife 2026 Sequoia i-FORCE MAX, specifically for the V35A-FTS Engine.
Hi team, hope you’re all doing well! About two months ago, I shared a post about my 2026 Toyota Sequoia 1794 Edition and its first two Blackstone Laboratories oil-analysis reports. I’m happy to share two additional reports and an updated look at the oil, wear and filter trends through 15,941 miles.
I’m attaching all four complete reports. I recommend reading the Comments section in each one because Blackstone’s written interpretation provides useful context beyond the individual numbers.
**Vehicle dates**
\- Built: April 4, 2026 \- Engine manufactured: March 24, 2026, at 12:00 p.m. \- Delivered: April 21, 2026
**My conservative break-in oil-change strategy**
\- 629 miles — factory-fill oil \- 1,671 miles — 1,042 miles on oil \- 3,188 miles — 1,517 miles on oil \- 6,270 miles — 3,081.6 miles on oil; Blackstone Sample #1 \- 9,480 miles — 3,209.7 miles on oil; Blackstone Sample #2 \- 12,562 miles - 3,082.2 miles on oil; Blackstone Sample #3 \- 15,941 miles — 3,377.9 miles on oil; Blackstone Sample #4
Samples #1–#3 used Toyota Genuine Full Synthetic 0W-20 and Toyota OEM filters. Sample #4 used Mobil 1 Advanced Full Synthetic 0W-20, ILSAC GF-7A, with a Toyota OEM filter. The dealer provided the Mobil 1 for this interval. I physically verified the product, and the technician’s video of the service also confirmed that it was used.
**Blackstone results and four-sample trend**
\- Copper: 10 → 8 → 4 → 4 ppm \- Iron: 5 → 6 → 3 → 3 ppm \- Aluminum: 3 → 3 → 3 → 3 ppm \- Lead, tin, chromium and nickel: 0 ppm in all four reports \- Fuel: 0.5% → <0.5% → <0.5% → <0.5% \- Flashpoint: 375°F → 410°F → 420°F → 420°F \- Insolubles: 0.1% → trace → trace → 0.1% \- Viscosity at 100°C: 6.91 → 7.11 → 7.32 → 7.30 cSt \- TBN: 4.7 → 4.7 → 4.6 → 4.3 \- Boron: 18 → 15 → 15 → 42 ppm
In the third report’s Comments section, the Blackstone Laboratories analyst noted that copper had reached the universal average and said this “marks the end of the wear-in period.” Based on that interpretation, the wear-in period for my Sequoia had reached its end at approximately 12,562 miles.
In separate emails about those results, the analyst described the samples as healthy and said the tiny amount of microscopic, non-metallic material did not appear harmful because it was not producing excessive wear or insolubles. He also indicated that my maintenance has been excellent and that the early oil changes helped remove initial break-in debris and contamination instead of allowing that material to remain in circulation for a much longer interval.
His earlier prediction that copper would continue declining toward the universal average proved accurate: copper decreased from 10 to 8 and then to 4 ppm, while iron fell to 3 ppm, aluminum remained steady at 3 ppm, and lead, tin, chromium and nickel remained at 0 ppm.
**Sample #4: first Mobil 1 comparison**
Sample #4 was my first interval using Mobil 1 Advanced Full Synthetic 0W-20, ILSAC GF-7A. After approximately 3,378 miles, the key wear profile was identical to Sample #3:
\- Aluminum: 3 ppm \- Iron: 3 ppm \- Copper: 4 ppm \- Lead, tin, chromium and nickel: 0 ppm
Blackstone described this identical wear profile as a strong indication that the internal components are wearing extremely well. The Mobil 1 maintained its 0W-20 viscosity at 7.30 cSt, produced a 420°F flashpoint and showed less than 0.5% fuel. No antifreeze or water was detected, and the 0.1% insolubles result showed no excess dirt or combustion residue. The 4.3 TBN also indicated that the oil still contained plenty of active additive reserve.
Blackstone noted that this Mobil 1 formulation contained more boron than the Toyota Genuine oil used previously: 42 ppm compared with 15 ppm in Samples #2 and #3. That difference provides an identifiable additive signature, although it does not by itself mean that one oil protected the engine better. Blackstone also explained that it generally does not find oil brand alone to make a meaningful difference in wear, but supported my experiment to determine what works best for this engine. Based on the oil’s condition, Blackstone said I could try a 6,000-mile interval.
**My oil-formulation comparison and traceability project**
Toyota Genuine Full Synthetic 0W-20 is manufactured for Toyota by ExxonMobil, but it is a Toyota-specific formulation and is not Mobil 1. ExxonMobil and Toyota also have a broader business and technical relationship, including work together in motorsports-related areas. Separately, the Mobil 1 brand has been a technology partner of Toyota Racing Development in NASCAR. I find that broader context interesting, but it does not mean Toyota Genuine oil and Mobil 1 are the same formulation.
My first three Blackstone reports established a very encouraging baseline using the Toyota Genuine oil. Sample #4 begins the next phase of my sequential comparison using Mobil 1 formulations.
My goal is not to use one report to declare a winner or claim that one brand is superior. I want to create consistent traceability by comparing sequential results under similar oil-change intervals while monitoring:
\- Wear-metal trends \- Viscosity retention \- Fuel dilution and flashpoint \- TBN and remaining additive reserve \- Insolubles and contamination indicators \- Additive-element patterns \- Oil-filter inspections \- Engine behavior and oil consumption \- Overall operating conditions
As Mr. Lake Speed Jr. of The Motor Oil Geek often says, “Operation Dictates Chemistry.” That’s why I think the oil-analysis results should be considered alongside how the vehicle was actually operated during the interval: frequent local and short trips, extended idling, stop-and-go and suburban driving, air conditioning generally set around 70–73°F in warm weather, and some longer, fully warmed highway trips. I also used Top Tier–certified Shell 93-octane gasoline throughout this period. I understand the V35A-FTS is designed to operate on 87 octane, so 93 isn’t required; I chose it because I wanted the detergent-additive package in Shell’s premium fuel. In my visual inspection, the filter media appeared free of visible black or dark carbon-like residue. That is my observation, not a laboratory measurement or proof that the fuel alone caused the filter’s appearance. This is the operating context for these results, especially Sample #4.
Sample #4 used Mobil 1 Advanced Full Synthetic 0W-20, ILSAC GF-7A. The current Sample #5 interval uses Mobil 1 Advanced Fuel Economy Full Synthetic 0W-20, and Sample #6 is planned with Mobil 1 Extended Performance 0W-20. This will allow me to compare the additive fingerprints and performance of the three Mobil 1 formulations against the baseline established by the Toyota Genuine Full Synthetic oil.
Although Blackstone said the Sample #4 oil was suitable for a 6,000-mile interval, I plan to continue approximately 3,000–3,500-mile intervals. My objective is consistent trend monitoring and long-term engine cleanliness—not determining the maximum possible life of the oil.
**Why I believe early oil changes are valuable**
From my own experience working in my cousin’s shops with both everyday and racing engines, I’ve learned that wear-in takes time. That aligns with what Mr. Lake Speed Jr. of The Motor Oil Geek has repeatedly explained and demonstrated through laboratory testing, used-oil analysis and oil-filter examinations presented in several of his YouTube videos: new engines generate their highest concentration of wear material during the initial break-in period, and the engine may continue wearing in beyond the first few thousand miles, depending on its design and operation. Refer to some screenshots from “The Motor Oil Geak”, attached.
Changing the oil and filter more frequently during these early stages helps remove accumulated break-in particles and other initial contaminants, reducing the amount of abrasive material that can continue circulating through the lubrication system and potentially contribute to additional wear.
That is the reasoning behind the early oil-change strategy I have followed since purchasing my Sequoia. My four Blackstone reports document copper declining from 10 to 8 and then to 4 ppm before stabilizing at 4 ppm. Blackstone considered the wear-in period complete at approximately 12,562 miles, and Sample #4 maintained the same excellent wear profile through 15,941 miles. To me, this real-world trend supports what Mr. Lake has been teaching: early oil changes are a practical way to remove break-in material while a new engine’s wear pattern gradually stabilizes.
**Oil-filter inspections**
I opened and visually inspected every OEM filter from the early oil-change sequence. I’ve also attached photos of the oil-filter media pleats for reference. The factory-fill filter showed the most visible fine break-in material. The filters at 1,671 and 3,188 miles were about 95% clean, with only a few small particles; the filters at 6,270 and 9,480 miles were very clean as well.
Based on my visual inspection, the 12,562-mile filter was mostly clean. Compared with the 6,270- and 9,480-mile filters, it appeared slightly less clean: about 13 pleats each had only two or three extremely tiny, mostly silver pinpoint particles, while a few other pleats had a small amount of microscopic silver and dark material. No meaningful debris was visible in the canister. I could not reliably observe or confirm any debris in the Mason jar used to collect the third sample.
I also compared the Sequoia filter media visually with the oil-filter media from my 2024 Lexus IS 500 2UR-GSE at 26,115 miles, when I inspected the Lexus oil filter, and the two looked essentially identical to me. These filter and jar observations are my own visual observations, not Blackstone laboratory measurements.
**Overall assessment**
I’m encouraged by the declining and now stable copper, low iron and aluminum, absence of concerning bearing metals, minimal fuel dilution, correct viscosity, clean insolubles and strong remaining TBN. These early oil changes have been absolutely worth it to me: they helped remove initial wear-in material and gave me a documented view of the engine’s entire wear-in and post-wear-in trends.
I also want to be clear about what these results do and do not prove. My healthy results cannot guarantee that this engine will never experience a failure, and following my oil-change strategy cannot guarantee that another owner’s engine will last forever or prevent every possible mechanical problem. At the same time, these four reports directly demonstrate that my particular V35A-FTS is showing an excellent wear trend through 15,941 miles, including an identical wear profile after changing from Toyota Genuine Full Synthetic oil to Mobil 1.
I have followed the V35A-FTS debris and engine-failure discussion closely since it began around 2022–2023, including NHTSA documentation, Toyota recalls, reported failures, engine teardowns, laboratory information and many different opinions across YouTube and social media. I’m sharing my experience humbly as one carefully documented real-world example—not as proof that every engine is problem-free or that every owner must follow my strategy.
I simply hope these reports, filter inspections, mileage records and formulation comparisons add useful information to the discussion and help other owners make informed maintenance decisions.
Hope this helps someone.
Many Blessings!