RedditPP Mascot

RedditPP

r/turntables • … • u/WadeBoggsMoustache

Fixing Buzz Coming off My Lenco L60 RCA Cables

I acquired a Lenco L60 (a 1970s belt-driven model, not the idlers Lenco is known for) and am trying to sort through some buzzing. (Note, already asked this question on the Lenco Heaven forum and didn't hear anything back.)

The last owner wired in an RCA cable that is super long and, I think, not sheathed in any way. A cheap and shoddy cable. I believe this cable is the cause of substantial humming and buzzing coming off of the turntable. The reason I believe it is the RCA cables is (1) the ground wire is secured, (2) whenever I move the RCA cables the buzz gets louder and quieter depending on where I place it, and (3) when I coil it with cable ties and secure it alongside the metal cabinet of my amplifier, it gets quieter as if it's getting more grounded. An additional issue is that it picks up radio signal very audibly until the platter turns on.

My questions are:

1. Should I do anything more to ensure that the RCA cables are the source and not, say something in the tonearm or elsewhere?

2. What specific cable should I ask him to solder in? Or alternately, what search terms should I use to find a good one?  I have been thinking of just asking him to solder in one end of this Project E Series RCA with ground: [https://www.audioadvice.com/products/pro-ject-connect-it-e-phono-cable-din-to-rca?variant=41288597700692&gad\_source=1&gad\_campaignid=23014693375&gbraid=0AAAAADRzHk987vhooeshzvQfsJENnOco6&gclid=EAIaIQobChMIiKq3uf6LkAMVTilECB1lwhL7EAQYAyABEgLz\_PD\_BwE](https://www.audioadvice.com/products/pro-ject-connect-it-e-phono-cable-din-to-rca?variant=41288597700692&gad_source=1&gad_campaignid=23014693375&gbraid=0AAAAADRzHk987vhooeshzvQfsJENnOco6&gclid=EAIaIQobChMIiKq3uf6LkAMVTilECB1lwhL7EAQYAyABEgLz_PD_BwE)

3. Is there anything else I should consider in this process of fixing it?

— 0