Is a poor connection enough to cause this?
While I was away, the wife reported that she flicked all three kitchen lights at the same time and now there's none working at all. Checked the MCB, OK checked the switch, also OK... except there was no voltage. Worked out that the switch was fed by an outside light switch so I investigated that. Here I found the main 240v input wire was just resting in the com line... not in the clamp at all. The spots on the wiring appear to be hot spots where the wires gave touched and started to melt. Would that poor connection be enough to overheat the wires? Or am I looking at something fundamentally wrong in the wiring?