RedditPP Mascot

RedditPP

r/ultrawidemasterrace • … • u/basketballfreak6

AW3926QW Replacement Panel Uniformity Update

Following up on my original review: [https://www.reddit.com/r/ultrawidemasterrace/comments/1vdawen/my\_early\_impressionsreview\_of\_the\_alienware/](https://www.reddit.com/r/ultrawidemasterrace/comments/1vdawen/my_early_impressionsreview_of_the_alienware/)

So I was one of the Aussies that got their hands on the AW39 early and during my review I noted that there's a colour shift towards green when viewed off axis and more noticeable towards the bottom. With a screen this size if you sit somewhat close to the monitor you're probably going to notice the shift towards the edge and particularly the bottom. Dell approved my replacement request and about a month and a half later I finally received the new panel. Original panel had a manufacturing date of June 2026 and the new panel showed August 2026.

Unfortunately with the new panel not much has changed with the exception that with my first panel the right side seemed dimmer than the left and it appears more even now.

This time around I've actually bothered running uniformity test with my Calibrite Display Plus calibrator:

![img](k52uta74vcrh1)

I am in Creator mode and sRGB colour space with the screen calibrated to 120nits. As you can see from the results there's noticeable luminance drop from the center with the bottom performing the worst which would also explain why the bottom literally looks worse when in use. So it seems like what people are saying it's CPC at play and not much we can do until Dell gives us the option to turn it off.

I will say though and preface by stating that I understand everyone's tolerances are different but honestly it's really a non-issue when viewing normal content and gaming etc. I've noticed recently there are some people posting photos of their panels asking if they have uniformity issues and I always thought to myself if you don't notice it why are you bothering to ask? I do understand this is an issue if you do professional work in which case yes it is disappointing if you're hoping for a single work and play monitor.

For me personally I am sticking with the monitor since it really is a beautiful screen to look at and I only do the odd paid jobs as a photographer and the shift is not detrimental enough for what I do. But I am in contact with Dell for another replacement because along the bottom edge of this screen there is a physical gap/poor seal where I can actually see through to the vents on the bottom so that's a whole other thing I now have to deal with.

Update 13/10: so my second replacement (due to physical/cosmetic issue as per original post) arrived today (also manufactured in August); calibrated as per usual and ran uniformity test...and pretty much same result/behaviour as panel #2. So I think we can pretty safely conclude this is normal behaviour for this panel and until Dell allows us to disable CPC it's something you'd have to learn to live with (though again, I think it's mostly a non-issue if you were to just use the monitor just use the monitor normally instead of looking at test screens all day).

— 0