Solar panel combination puzzle
Here is my situation. I am a frugal person. I got two solar panels at a pawn shop for cheap.
2 x 100W panels - Vmp = 18.0V, Imp = 5.55A each
Then I was lucky enough to be given a 260W panel for free.
1 x 260 W panel - Vmp = 30.5V, Imp = 8.51A
I would like to add the 260W panel to my existing panels on my van. I have an Epever Tracer BN3215 MPPT controller which should handle any of the scenarios below.
There are two ways to combine the 100W panels:
series - 36.0V, 5.55A parallel - 18.0V, 11.10A
With each of those options, I can either series or parallel the 260W panel with them so that means a total of four ways to combine.
1. Parallel 100W panels/Parallel 260W - 18.0V, 19.61A = 353W 2. Parallel 100W panels/Series 260W - 48.5V, 8.51A = 412W 3. Series 100W panels/Parallel 260W - 30.5V, 14.06A = 429W 4. Series 100W panels/Series 260W - 66.5V, 5.55A = 365W
I was hoping to get a sanity check that I did the math right. I will probably choose option 2 to be able to use my existing wiring from the panels to the controller and keep the power as high as possible. With option 3, I would gain 17W but would have to rewire that run.
Thanks to anyone who looks this over. I edited to make the spacing better.