RedditPP Mascot

RedditPP

r/videography • … • u/KN4AQ

Cannon XA60 3.5mm Mic Input - Mono only?

I recently purchased a new Canon XA60 camcorder to replace an aging Sony (looks like Sony has exited the low-end prosumer market).

Mostly looks great, but one issue. And after extensive troubleshooting, I sent the unit back to B&H for an exchange... just booted up the replacement and **SAME PROBLEM**.

That problem is: The 3.5mm mic input (the one on the Camera body, *not* the XLR inputs on the handle) is only working in **mono**. Left and right audio sources are summed and appear on the meters, in the headphones, and on recordings as mono on both channels.

Can anyone verify that this mic input should work - *does work* \- as stereo? (or, I suppose, that it's for sure only mono, but I have a hard time believing that at this point).

I'm guessing you'll want troubleshooting details.

The mic system is a Hollyland Lark MAX two-mic wireless system (see picture). The receiver output connects to the camera with a mic cable with 3.5mm stereo (RTS) jacks on both ends.

The receiver does have a mono output setting. It is set for stereo, and the audio is stereo on its own meters.

It is working as stereo (right now) on the old Sony camera.

I have swapped cables. I fed the camera with a stereo output from a mixer. All still mono on the camera.

The camera audio is working in stereo (two-channel) with its internal mic, and the XLR connectors on the handle work as independent channels.

I've tried with the handle (with XLR inputs) both *on* and *off* the camera (and I do have mics with XLR to test with). There is an on/off switch on the handle, and **ON**, I have two-channel audio from the XLR inputs. **OFF**, I have mono audio from the Lark MAX receiver.

I have reviewed all the camera settings, on the unit and in the manual. I don't find anything that would change this input to mono (I have separated the ALC, but either way that shouldn't turn the audio to mono).

But yes, I'm *hoping* that I missed a setting somewhere.

It is possible, but very unlikely, that two units could have the same defect, if that's what it is. I'll be trying to call Canon next. I've never had a Canon product and never dealt with their customer service, so 🤞. I've had much better luck with Reddit 🌷 \[EDIT: Oh, and yeah, I've just learned how to spell **Canon**. I corrected the body, can't fix the headline)

BTW, I'm a retired 50-year radio/TV/media pro (video editor, audio engineer, videographer, producer, podcaster). Cameras like this, and desktop editing programs, let me have fun on my own small projects without the million-dollar post suites I used to command. I know what I'm doing, but anyone can miss something easy (or hidden) 🤔

Thanks!

— 0