RedditPP Mascot

RedditPP

r/vintageaudio • … • u/DaCrimsonKid

The Fisher X-100-A

I had heard about The Fisher amps over the years. Mostly the high watt versions, as they tend to get the attention, but never had the opportunity to hear one. Honestly, 60 year old integrates just weren't really high on my priority list.

But some of my audio priorities have changed over the last while, opening me up to some ideas I previously hadn't considered. My needs for power are low due to efficient speakers, so when this popped up on FB Marketplace for not much money I thought I'd give it a spin and resell it once I had some time with it.

To say I'm surprised at how fantastic this thing sounds would be an understatement. It's ugly as sin, dirty, runs hotter than the sun, but holy smokes it sounds incredible. At low volumes it is so full and lively. The phono section sounds great as well.

It's 18w per channel with EL84 tubes in the power section. For my usual listening levels, I only hit 2.5 or so on the volume dial, so no problem with the output levels for my needs.

Needless to say, I won't be selling it on. It's a keeper for certain. I may even look into finding the correct wooden case to pretty it up a bit.

One tip for anyone in the future who may stumble across this post trying to solve a hum problem. After I took it home and gave it a good listening, I decided to clean it up a bit, deoxit the pots, checked the fuse, you know, the usual bare bones checkup. I noticed that after that process I heard some 60hz hum that I didn't hear before the cleanup. So I checked the usual stuff, my cables were well seated, ground on the TT was solid, reseated all the tubes, still hum. I removed the fuse again, adjusted the spring in the holder and wiped a little deoxit on it and that fixed the hum. Gone. I never would have figured it to be the fuse in the fuse holder.

— 0