RedditPP Mascot

RedditPP

r/watchrepair • … • u/Papperskatt

Please help me find a mechanical replacement for VD78

I have a few watches that I love that use the VD78A quartz movement with a small second display at 6. While I don't mind quartz per se, I really despise the ticking seconds hand.

With the VD70-line being discontinued I have tried to contact TMI, asking if they might release a drop in replacement in their VH-line (which have a 4Hz sweeping seconds hand), but I have not received any answer. I have also tried to contact Sunon since they also make a quartz movement with a sweeping seconds hand (SP68), but no answer there either.

I considered the possibility of modifying a VH31 movement and got really excited when I discovered that it even had a pivot hole in the 6 position! But alas, the spacing is 6.9mm and the VD78 have a 7.5mm spacing...

I know of two readily available mechanical movements that would fit the cases and have small seconds. It's the ST1701 from Seagull and the SL3006 (based on ETA 2824-2) from Peacock. Their spacing? 7 and 8mm… SO CLOSE!!!

There's also the 6490A from Hangzhou (also based on the ETA 2824-2) but I haven't been able to find a datasheet for that model yet.

So my question to you, dear reader, is if you might know of a mechanical movement with the following criteria:

1. Small seconds display at 6, with a 7.5mm spacing 2. \~5mm thick 3. No bigger than 27.3mm 4. Stem height \~1.5mm (which would have ruled out the SL3006) 5. It needs to be somewhat readily available and not too expensive 6. Ideally automatic but that's not critical

I have no idea where to even start the search. I'm eternally grateful for any suggestions!

Thank you very much for reading this!

— 0