RedditPP Mascot

RedditPP

r/watercooling • … • u/xMuRKaGe

Very high idle temps

Rig specs:

CPU: Ryzen 3900x, EK-Quantum velocity waterblock, stock speeds, windows balanced power plan, stock voltages

MB: Gigabyte aorus master x570, bios version

RAM: 32gb G Skill Trident Z Neo

GPU: zotac amp holo RTX 3080, EK Vector Trinity waterblock, stock speed/voltage/power

Case: Phanteks Enthoo Luxe

PSU: Corsair Hx 1200 Platinum

Cooling: 200mm fan in front, 360mm EK Performance Rad in top with 3x120mm EK Vardar fans, EK-XRES 140mm D5 PWM pump, hardline tubing.

Recently added the RTX 3080 to my loop. Pre adding the 3080, my 3900x idled at 45°c and peaked at 64°c under heavy load. The RTX 3080 idles at 25°c and peaks at 50°c. Now the 3900x idles at 60°c and peaks at 77°c which is a little too high for my liking. I've also seen on Ryzen Master that it always seems to be around 1.41 volts, despite it being set to 1.3 in the BIOS.

Any advice on how to lower the temps on my 3900x would be appreciated, I can't wrap my head around why it's so high now while the 3080 runs relatively cold. Similarly if anyone has any advice on the voltage issue I'd be grateful, I know there's a lot of other posts with people having similar issues, but I've tried most of the fixes suggested there and I've had no luck.

As a note: I can't seem to be able to alter fan or pump speeds in BIOS. The fans are clearly running, but in smart fan 5, it shows up with 0 rpm and 0 flow for my fans and pump. The 4 fans are plugged into a fan hub on the case which is plugged into the CPU fan header. The pump is plugged into the chassis pump header. All fans and the pump are PWM.

Thanks.

— 0