First project ever help with order of operations (sanding- stain & finish)
I’m looking for advice on a few things, please be kind I am incredibly new to this. I procured some maple from my buddy’s farm and then processed it with my uncle out of town. I am using 3 of these slabs to make a bar cart for the house. (Finished up with some black piping nipples, elbows, flanges etc). Question about the wood. I sanded it in order down to 220, cleaned, and applied wood stain as suggested with foam applicator. It said not to sand inbetween. This is what it looks like after 2 coats, and one drying coat of semi finish. It looks patchy (all 3 slabs/6 sides). Is this just how the wood looks, or am I missing something with the sanding? This is presentation side up, so I am not worried about the hot glue marks you can see (we glued on a straight piece as a reference point to get a straight edge on the back as the 3 shelves are live edge. I couldn’t get dimensional, and my wife wants the live edge look. Anyway. How do I clean this up so the wood looks “better” or am I doing this right, and just keep going? I will do a bunch of finish coats (3-5?) but at what point do I sand, and do I sand with 220 or 320? Do you do this sanding by hand or palm sander? Those are my options now at my house. Thank you.