RedditPP Mascot

RedditPP

r/woodworking • … • u/Ill_Choice6515

Walk-in closet custom cabinet material choice and questions

Hi all - in next month I’m embarking on a walk-in closet. I’m currently working on plans to figure how much material I need and I’d love some input. Above is just one section of the builtins for reference. I’ve got a few questions so I’ll explain what my thoughts are and pose my questions in groupings. Building these slightly over the top because I want to challenge myself and learn new skills - so it may not be the most efficient/cost effective way of building them. But I would love input from more experienced people.

Since it’s not near any water and will be painted, I was thinking about using only MDF. My thoughts are using 1/2” MDF for the boxes. 3/4” MDF for the shelves. Using a 1/4” Dado on the boxes around the perimeter to slot shelves in (so they’re supported by more than screws/nails) and doing the same for the top and bottom. Questions: - Would you be worried about any sag with the span of the shelves? (Largest span with no uprights underneath is 39”) - If you were building these would you do anything different? - Is MDF a good choice for this application?

Each box ends up being about 8’ 6” tall (8’ 4” inside) Questions: - Is it possible to get MDF (or whatever other material you’d suggest) in a sheet longer than 8 feet? - Or should I build the boxes in parts? - any suggestions on where to look for that? I live outside Atlanta if anyone knows specific places near here.

Lastly, there is a section of drawers that I’m making as well - I was thinking of trying my hand at dovetail joints, but logically I don’t think MDF is a good choice of material for those joints. Questions: - What type of wood would you suggest to use for the drawer boxes? - Or would you suggest a different type of joinery for the boxes all together? - Any suggestions on drawer slides? Brands and using side mount vs bottom mount slides?

— 0