RedditPP Mascot

RedditPP

r/woodworking • … • u/perkee

What's a good hidden hinge for a chest lid with a big overlap

I have finished and waxed my son's toy chest. Now all I gotta do is attach the top. I'd like to use nice Euro hinges and a Sugatsune soft close arm (maybe two of them since it is kind of heavy). I measure the lid at 20 5/8" × 40" × 3/4"? Using the estimate of 710 kg/m³ from Engineering Toolbox that's 16 lb (7.25 kg) which feels right.

The issue is the overlap. The distance from the inside of the box (where the "inside" part of the hinge would mount) to the back of the box is about 1.1 inches. The lid and the part that it has to clear have the same 1/8sh chamfer routed around them, so I get a bit of leeway with clearance, but not a lot.

I would really hate to cut the mounting holes in the lid just to find out that the hinge cannot move 1.125" of wood out of the way of the body of the box. So I have three questions:

1. When I search for hinges from suppliers, what is the name of the dimension that I want to make sure is north of 1 1/8"? 2. Do you have a specific hinge make and model that solves this? 3. Are my prior assumptions faulty? Am I looking for the wrong product? Is there a better integrated soft close hidden hinge that will work on an ash lid of this size? My assumption is that I need to solve the soft close problem separately from solving the long-reach hidden hinge, problem, but I'd be happy to be wrong

![img](f7qd4mxken7e1 "The top jaw of the caliper is on the inside surface of the chest. That's where the interior hinge hardware will mount. The bottom jaw is where the edge of the lid will be flush with. Note the ~1/8\" chamfer around the top of the \"leg\" it needs to clear.")

![img](mjeya9slen7e1 "Lid set on the box about where I want it. Note its edge being flush with the back surface of the \"leg.\" Also it's hard to see, but there is a ~1/8\" chamfer around the bottom of the lid, so more room to clear the top than you'd think.")

— 0