Looking for a clear, grippy/tacky finish. Any ideas?
Context: I'm making some magnetic knife boards (the type you hang on the wall which magnetically hold kitchen knives). I have routed a channel through the back of the boards and mounted some strong neodymium bar magnets into the channel. They hold knives to the board well enough, but aren't as strong as I would like to.
Neodymium bar magnets are expensive, and I don't really have enough room on the boards to mount another row of magnets, so I would like to avoid adding more magnets if possible.
I also cannot rout the channel any deeper as I risk punching through the face of the board and ruining the whole project.
My idea is once the board is finished, applying some sort of rubberized/tacky/grippy finish on the face of the board to increase the friction between the surface and the blade of the knife to keep it from slipping off the board. It needs to meet the following requirements:
* MUST be as clear/transparent as possible so as to not detract from the grain of the wood on the face of the board * Must be as thin as possible to keep the knife blade as close to the magnet as possible * Preferably something easy to apply/brush on. I'd like to avoid spray if I can
The best thing I can come up with myself is silicone plumbing tape like this, however I fear the durability and thickness will be a problem, as well as being aesthetically cheap looking: [https://a.co/d/9JqiAgi](https://a.co/d/9JqiAgi)
Anybody have any good suggestions?