Biesemeyer Home Shop Fence sanity check
I bought a used contractor-style table saw 20-odd years ago and it came with a Biesemeyer fence. I do not see any model numbers on it, but it's the "Home Shop" version; made in Mesa; and owned by Delta. Plus is at least 20-something years old. Since I got it used on a cheap old saw, I don't know what was original to the fence system and what was cobbled together along the way.
What I have is:
1. The fence 2. A 60" long 2-1/2" x 1-1/2" guide tube 3. A 48" long 1-1/2" x 1-1/2" angle iron rear rail with a single shallow notch in it 4. A 48" long 2-1/2 x 2-1/2" angle iron front rail with two wider but even shallower notches
Are any of the guide tube and two rails original to the Biesemeyer fence kit? The rails are powder coated the exact same off-white color as the guide rail, but since they look nothing at all like the examples in the manual I found, I don't know. It does seem unlikely that a DIY set of rails would be powder coated...
The instruction manual I found only talks about 28", 40", and 52" capacity systems. What would a 60" guide tube correspond to?
And it is common for the guide tube to be that much longer than the front and rear rails?
Anybody have a fence system like this that can tell me if what I have is reasonable?