I designed and built this bar using 121 individually cut pieces of aged mirror.
This is a bar I designed and built for a private residence. The main idea was to create a surface that would change as you moved around it rather than just reading as a flat mirrored face.
The front is made from 121 individual strips of aged mirror, alternating between silver and gold. Each strip is set at an angle, so as you walk around the bar the reflections and colors shift and the whole surface almost shimmers.
The part you don't really see in the finished piece is all the woodworking underneath. I designed the repeating support geometry manually in Rhino and CNC cut the supports from 1" maple. Each mirror strip was cut from 4' x 10' sheets, edge polished in the shop, backed with 1/4" plywood for support, and then bonded to the maple structure with a silicone-based adhesive.
The rest of the bar is built from 3/4" maple for the visible components and 3/4" birch plywood for the hidden structure. The maple was stained walnut and finished with satin water-based polyurethane. We built the bar in four sections in the shop, assembled them on site, and then installed all of the mirror pieces there.
The top is 1/4" Neolith. We subcontracted that part because the material is incredibly hard and requires specialized equipment to cut and shape.
Probably my favorite part of this project is how little of the structure that creates the effect is visible once everything is finished. From the outside it looks like a relatively simple faceted mirror surface, but there is a whole wooden framework hiding behind those 121 pieces.