Early quarantine project
My parents moved for the first time in 30 years at the beginning of March. They’re both retired college professors, and had tons of built-in shelves in their old house. Prior to their move, they asked me about buying some more shelves, and I told them to wait until they were in the new house (they were going through a purge), and to avoid particle board shelves.
In late March, now totally unpacked except for their books, my mother starts sending me links to shelving units. All are made from MDF if you do enough digging.
I tell her that these aren’t made for actual books—the weight will bow them all in a year.
She keeps sending links, they’re all garbage.
Finally, I say, “when I come visit, I’ll build you some.” Oof.
So, now I have to figure out how. I’ve built plenty of bookshelves before, but always with access to my space, tools, and plenty of time. My parents live 4 states and 8 hours away. I’ll have a week, max, to build at least 3 8’x3’ cases, finish them, and move them into place.
After a fair amount of thinking about the tools I can readily bring without renting a larger car and with having to bring wife and child for a week, I settle on this approximate [design](https://www.thisoldhouse.com/furniture/21016496/how-to-build-a-bookcase). Red oak plywood and solid red oak trim.
I find a hardwood dealer that will rip the plywood for me so I can skip renting a table saw during Covid. Outside vertical pieces ripped to 11.25” wide, shelves and shelf support to 11”, leaving space for 1/4” red oak plywood backs. Trim all solid 1x2, S4S, saving time there as well.
I pack my pipe clamp heads and place a pickup order at the Home Depot by my parents for 4’ pipes, Titebond 3, water based poly, and a decent Ryobi sliding miter saw with 12” capacity. Pack my finish nailer and pancake compressor, squares, PPE, sander and #4 smoothing plane.
When we get there, I use some of the scrap plywood the yard delivered to set up an auxiliary fence on the miter saw and go to town. Uprights stay at 8’; shelves at 34.5”, leaving the case 3’ wide. Rig up a planing station on the back deck with some clamps and plane all the trim.
Final results [here](https://imgur.com/a/4LszUAO)