RedditPP Mascot

RedditPP

r/woodworking • … • u/Mediocre__at__Best

Need help guys. This is not an exciting post, but hopefully someone can clue me in.

So, I've decided to use a combination of hanger bolt and binding barrel to create a sliding mechanism in a project I'm working on, but am having massive issues with the hanger bolts. The issue being weather I use an acorn nut or a specifically designed hanger bolt driver (which is tapped to match the threads of the bolt), once I drive the bolt to depth the either the acorn nut or driver is tight to the bolt and will only turn and unscrew the bolt rather than just come loose and undo *from* the bolt.

Is there something I'm missing in the function of driving a hanger bolt? I'm aware I can solve the problem with 2 nuts tightened then driven and released, but I need to scale this up and doing that method just takes too much time and is inefficient.

Any insights are appreciated. Thanks.

— 0