RedditPP Mascot

RedditPP

r/zfs • … • u/viperfan7

Doing something dumb in proxmox (3 striped drives to single drive)

So, I'm doing something potentially dumb (But only temporarily dumb)

I'm trying to move a 3 drive stripped rpool to a single drive (4x the storge).

So far, I think what I have to do is first mirror the current rpool to the new drive, then I can dethact the old rpool.

Thing is, it's also my poot partition, so I'm honestly a bit lost.

And yes, I know, this is a BAD idea due to the removal of any kind of redundancy, but, these drives are all over 10 years old, and I plan on getting more of the new drives so at most, I'll have a single drive for about 2 weeks.

Currently, it's set up like so

pool: rpool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub repaired 0B in 00:53:14 with 0 errors on Sun Dec 8 01:17:16 2024 config:

NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 ata-WDC_WD2500AAKS-00B3A0_WD-WCAT19856566-part3 ONLINE 0 1 0 ata-ST3320820AS_9QF5QRDV-part3 ONLINE 0 0 0 ata-Hitachi_HDP725050GLA360_GEA530RF0L1Y3A-part3 ONLINE 0 2 0

errors: No known data errors

— 0