RedditPP Mascot

RedditPP

r/zx4r • … • u/Jfkexperience69

ZX-4R Right Fairing/Cowling 3D scan.

I decided to finally to scan my motorcycle fairings after dropping the bike on the left side (I forgot to put the kickstand down after working on the chain tension; may the creator of the chain tensioning indicators be publicly \*\*\*\*\*\*\*\*\*, inshallah). These scans are from the right side, which is still untouched.

[https://www.printables.com/model/1858086-kawasaki-right-side-main-fairing-and-indicator-3d](https://www.printables.com/model/1858086-kawasaki-right-side-main-fairing-and-indicator-3d)

All of the original skins were cleaned up extensively in Blender over two days. Some of the mounting tabs might not be the most aesthetically pleasing, but they should be functional. You may, however, have to drill out the holes to make it easier to mount using an M3 or M4 drill bit.

I scanned the parts with the stickers still attached. You can see them in the scans. I left them in to ensure that the model remains accurate and so that you can easily attach the stock stickers to their original spot. If you do not like them, I recommend just going into Blender's sculpt mode and either trim brushing or mesh deflating that area.

The indicator and indicator tabs were also scanned. They should be mirror images that you can just mirror in the slicer to effectively get the model for the left side.

If you are looking for other parts of the bike, you can find a collection of other ZX-4R Scans [here ](https://www.printables.com/@IsopropylAlc_2599466/collections/3158680)for free.

— 0